What are the 14 parts of the sewing machine in the arm?

What are the 14 parts of the sewing machine in the arm? handwheel, top shaft, feed drive eccentric, lower shaft drive, top...

What are the 14 parts of the sewing machine in the arm?
handwheel, top shaft, feed drive eccentric, lower shaft drive, top shaft bushes or bearings, needle bar drive and needle bar , presser bar, and spring and thumb nut. There many parts in the arm you may want to download a parts breakdown of a sewing machine.

Also question is, what are the upper and in the arm part of the sewing machine?

There are two major parts of the sewing machine. One is upper part and other is lower parts. The upper part contains of Head, Arm and Bed. The lower part contains of Band Wheel, Band Wheel Crank, Pitman Rod, Belt Guide, Belt Shifter, Dress Guard, Treadle, Legs.

Similarly, what are the parts of sewing machine and its function? Functions of Sewing Machine Parts:

  • Spool pin: The main function of spool pin is to hold the spool of thread.
  • Bobbin binder spindle: During winding, bobbin is placed here.
  • Bobbin winder stopper:
  • Stitch width dial:
  • Pattern selector dial:
  • Hand wheel:
  • Stitch length dial:
  • Reverse stitch lever:

Keeping this in view, what are the different parts of a sewing machine?

Different Parts of Sewing Machine:

  • Spool pin,
  • Bobbin binder spindle,
  • Bobbin winder stopper,
  • Stitch width dial,
  • Pattern selector dial,
  • Hand wheel,
  • Stitch length dial,
  • Reverse stitch lever,

What is the function of the thread guide?

Pressure Foot Lever: The primary function of this part is to raise or lower the foot level. Thread Guides: This is a small hole that guides the thread from the spool to the needle. Thread take-up lever: The take-up lever pulls the thread back after each stitch, so that the stitches will lay evenly into the fabric.

37 Related Question Answers Found

What is the upper part of sewing machine?

The upper part of a sewing machine has Bed, Arm and Head. The lower part of a sewing machine contains legs, Treadle, Dress guard, Belt Guide, Band wheel, Belt Shifter, Pitman rod and Band wheel crank.

What are the parts of sewing machine in arm?

Now clarified that the arm is the top section of the machine , the parts in the arm are, on plain sewing machine for example. handwheel, top shaft, feed drive eccentric, lower shaft drive, top shaft bushes or bearings, needle bar drive and needle bar , presser bar, and spring and thumb nut.

What is a feed dog on a sewing machine?

A set of feed dogs typically resembles two or three short, thin metal bars, crosscut with diagonal teeth, which move back and forth in slots in a sewing machine’s needle plate. Their purpose is to pull (“feed“) the fabric through the machine, in discrete steps, in-between stitches.

What part of sewing machine which holds the fabric in place?


holds the bottom thread bobbin
holds spool of thread spool pin
holds the fabric against the feed dogs as you stitch presser foot
regulates the tension of the tension discs on the needle thread tension control

What are the 8 different types of sewing machines?

Different types of sewing machines

  • 1 Domestic model sewing machine.
  • 2 Industrial model sewing machine.
  • 3 Hand operated sewing machine.
  • 4 Treadle sewing machine.
  • 5 Mechanical sewing machines.
  • 6 Electronic sewing machine.
  • 7 Computerized sewing machine.
  • 8 Mini sewing machines.

What part of the sewing machine controls the tightness of the upper thread?


Term Handwheel Definition Controls the up and down movement of the needle and thread take-up lever by hand.
Term Tension control Definition Adjusts the tightness or looseness of the upper thread.
Term Stitch length control Definition Used to adjust stitches from short to long.

How do you take care of a sewing machine?

How to Properly Take Care of Your Sewing Machine

  1. Keep Your Sewing Machine Covered. Dust is the enemy of machinery.
  2. Change Needles Regularly.
  3. Used Compressed Air to Remove Lint.
  4. Annual Servicing.
  5. Oiling the Machine.
  6. Find an Experienced Professional to Repair Your Machine.
  7. Clean One Part of the Machine at a Time.
  8. Wipe Down the Machine After Each Use.

What is a stitch regulator?

A stitch regulator is a tiny computer attached to a sewing machine that constantly adjusts the machine’s stitch speed to accommodate the speed of the fabric during free-motion stitching. This ensures balanced, equal-length stitches.

What are the tools for sewing?

Basic Sewing Tools

  • Pins. You’ll rarely make a piece without using straight pins.
  • Pincushion. A pincushion is a helpful tool to keep your pins organized and at hand when you need them.
  • Seam Ripper. A seam ripper does exactly what it’s name implies.
  • Iron and Ironing Board.
  • Thimble.
  • Sewing Needles.
  • Scissors.
  • Presser Feet.

What are the types of stitches?

Let’s take a look at Top 6 basic sewing techniques.

  • Running Stitch. It’s the go-to-stitch for beginners.
  • Hemming Stitch. You can also find other names for that stitch.
  • Top Stitch.
  • Back Stitch.
  • Whip Stitch.
  • Basting Stitch.
  • Straight Stitch.
  • Zig-Zag Stitch.

What does a bobbin do?

A bobbin is a spindle or cylinder, with or without flanges, on which wire, yarn, thread or film is wound. Bobbins are typically found in sewing machines, cameras, and within electronic equipment. In non-electrical applications the bobbin is used for tidy storage without tangles.

What is a face plate on a sewing machine?

Face plate: A cover which on removal gives access to the oiling points on the needle bar, presser bar and take-up lever.

What is spool pin?

Definition of spool pin. : a spool-shaped pin tumbler used in some cylinder locks to foil picking attempts.

What is the reverse lever on a sewing machine?

The reverse lever is the part of the sewing machines that makes sewing backward possible. This function is essential when stitching since it allows you to secure your stitch at the beginning. The reverse stitch is also necessary when finishing up a seam. For some machines, it’s a lever, while for others, it’s a button.

What is a needle clamp?

Needle clamp for sewing machine, particularly child’s sewing machine, with the needle clamp knob located between the parallel needle and presser bars. The clamp knob and screw extend from the needle bar to strike the presser bar when retracted from the sewing needle, thereby preventing loss of the clamp screw.

What is a presser foot used for?

A presser foot is an attachment used with sewing machines to hold fabric flat as it is fed through the machine and stitched.

What is the function of spool thread?

The main function of the spool holder is to control the thread direction and hold the spool. Spool holder may be in the horizontal or vertical direction. Sometimes a sewing machine has more than one spool holder when decorative stitch needed.

Leave a Reply

Your email address will not be published. Required fields are marked *